Frequently Asked Questions

---

Super form is a channel design and not an angle, so its much stronger and because its wider you need less per meter. It also holds tie plates easily.

Super-Form does not rely on the friction of a bolt to stay in place, it has a traditional Push Pull prop which means unlike other bracket systems it can be re-aligned after the pour, so its  a far better finish as well as being much stronger.

Super-Form also uses Clevis Pins and not bolts, so it genuinely is easy to fold for transport.

So to sum up Super-Form is cheaper as you need less off them, our rental costs are also lower in any case, its stronger and Faster to fit so it saves on labour and as there are fewer of them, transport is also cheaper, plus we will beat any like for like quote by 20% !

We offer rental & sales on all our Super-Form formwork systems as well as selling a range of consumables. For our unique Road Form and slab edge system see www.roadform.uk

We offer Low Cost palletised delivery, anywhere in the UK on a 3 day or Next Day service, we also offer deliveries on our own trucks, see our Delivery page.

Yes we can supply Temporary Works Drawings if required, there is a charge for these, although below 1.2m high NO Temporary Works drawings are required and we have  comprehensive 'User Guide' available FREE that shows you all the uses of the system.

Yes Super-Form is very easy to use, no experience is necessary and we have a comprehensive 'User Guide' available FREE that shows you all the uses of the system. 

Yes Super-Form is perfect for single sided formwork, see our 'User Guide' and load tables, simply close brackets to  400mm centres ( depending on pour height), if you need advice just ask. 

Yes we rent and sell our unique Road Form and slab edge system see www.roadform.uk .

There are a huge amount of combinations for brackets but standard brackets with standard bases start at just £3.00 each per week on small bracket. ( Plus delivery & collection)

Depending on size and number, brackets start from just £40 and have a 25 year lifespan (Plus delivery) For our road forms see www.roadform.uk

Used on their own brackets, for a fair faced (good finish) we recommend one bracket every 488mm (centre to centre), this will mean a standard 2.44m plywood sheet will finish in the middle of a bracket. So just take pour length and divide by 488mm.  See user guide for fixing instructions, load tables etc. NOTE: If line is not crucial (i.e buried ground beams) then 688mm centres can be used. 

Generally brackets can support timber formwork at 1.2m centres, depending and pour height and pour rate, please see our user guide and load tables. 

Yes you can attach standard tube & fittings or systems such as Combisafe, please see our user guide . 

Yes we can form soffit, handrails and formwork for a complete capping beam, please see our user guide .